Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in New Orleans?
Chimney liner and rebuild work in New Orleans typically runs from about $1,800 for a straightforward stainless liner install to $14,000 or more for a full masonry rebuild on a historic home. The most common range we quote for a flexible liner is $2,400 to $5,200, and HeatShield ceramic flue resurfacing often lands between $1,200 and $2,600 when the flue is a candidate for restoration instead of a full reline. Every price we give is an estimate set by a written quote after we’ve looked at the flue, so the number on paper is the number that holds.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what the line items look like across the work we do in New Orleans. These are typical estimated ranges, not a menu – your written estimate is what sets the final price.
| Work item | Typical estimated range | What it covers |
|---|---|---|
| Pre-install inspection & flue assessment | $0 – $250 | Camera scan, flue measurement, determining whether resurfacing or relining fits |
| HeatShield ceramic flue resurfacing | $1,200 – $2,600 | Ceramic resurfacer applied to a cracked or spalling masonry flue that’s still structurally sound |
| DuraFlex stainless flexible liner (standard run) | $2,400 – $5,200 | Liner, insulation wrap, top plate, and cap for a one-story flue |
| Liner for a taller or offset flue | $4,000 – $7,500 | Longer runs, offsets around a second floor, or a flue that needs re-routing |
| Crown rebuild or repair | $600 – $1,800 | New crown, crown wash, or patching where the top of the chimney has cracked |
| Upper masonry rebuild (above roofline) | $3,500 – $9,000 | Rebuilding brick from the roofline up, reflashing, new crown |
| Full chimney rebuild, roof to firebox | $8,000 – $14,000+ | New masonry chase, liner, crown, flashing, and cap when the structure can’t be saved |
| Cap and top-seal components (Olympia, Copperfield) | $150 – $500 | Multi-flue cap, single-flue cap, or top-sealing damper |
What pushes a quote toward the top of a range: the height of the flue, whether there’s an offset around a second floor, how much of the masonry is actually failing versus just the flue interior, and whether the job is a liner alone or a liner plus crown and flashing. A single-story shotcrete or brick chimney with an intact crown and a straight flue tends to land near the lower numbers. A tall two-story chimney with cracked mortar joints, a crumbling crown, and an offset flue will land higher because there’s more to rebuild and more material to run.
The choice between resurfacing and relining is often the biggest cost swing on the page. HeatShield resurfacing restores a deteriorating masonry flue from the inside without tearing anything out, and when the flue qualifies, it can save a homeowner a significant chunk over a full DuraFlex liner install. Not every flue qualifies – a flue that’s lost too much masonry, or one with a broken clay tile that’s shifted, usually needs the liner. We check which path fits before quoting.
What Affects Chimney Liner & Rebuild Pricing in New Orleans
- Age and construction of the house. New Orleans has a deep stock of older homes, and chimneys built decades ago often have clay tile flues that have cracked, spalled, or separated at the joints. A flue with sound tile and only surface deterioration is a resurfacing candidate; a flue with broken or shifted tile is usually a reline. That distinction alone can move a quote by a couple thousand dollars.
- Flue height and roofline access. A one-story flue is a shorter, simpler liner run. A two-story home with a steep roof pitch or a chimney set back from the ridge takes more time and more material, which shows up in the estimate.
- Offsets and bends. A straight flue accepts a flexible liner with little fuss. A flue that jogs around a second-floor fireplace or an old chimney that leans takes extra work to line properly, and that’s a real cost item, not a line-item add-on.
- Masonry condition above the roof. New Orleans humidity and heavy summer rain work on mortar joints year after year. Cracked crowns, loose brick, and deteriorated flashing are common, and rebuilding the top of a chimney is priced separately from the liner itself because it’s a different scope of work.
- Material choice. We work with DuraFlex flexible liners, HeatShield ceramic resurfacer, and top components from Olympia Chimney and Copperfield. Professional-tier materials cost more than discount liners, but they’re what holds up in a wet climate and what a future inspection will pass.
- Whether you combine work. A liner install that also addresses the crown and cap in the same visit is more efficient than scheduling them as separate jobs. We quote the whole scope together so you can see the combined number.
How to Save on Chimney Liner & Rebuild
The single biggest cost lever is catching the problem before it becomes a rebuild. A flue that’s still a resurfacing candidate today may not be one after another season of water getting into cracked masonry. An annual sweep and inspection is the cheapest line item on this page because it tells you whether you’re looking at a $1,400 resurfacing job or a $9,000 rebuild.
- Ask whether HeatShield resurfacing fits your flue. If it does, it’s the lower-cost path. If it doesn’t, you’ll know why before you commit to a liner.
- Fix the crown and cap while the liner is going in. Water is what kills masonry flues in this climate. Sealing the top in the same visit prevents the next repair.
- Get the written estimate before work starts. A clear, itemized quote means no surprises mid-job. Estimates are free.
- Don’t put off a cracked flue. A flue with gaps lets heat and gases into the chimney structure, and a small repair now beats a rebuild later.
If you’re not sure which category your chimney falls into, that’s exactly what the inspection is for. Call (833) 946-8575 to schedule a look and get a written estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in New Orleans?
A DuraFlex stainless flexible liner in New Orleans typically costs $2,400 to $5,200 for a standard one-story flue, and $4,000 to $7,500 for a taller or offset flue. The written estimate after inspection sets the final price. Call (833) 946-8575 for a free estimate.
Is it cheaper to resurface a flue or replace the liner?
Resurfacing is usually cheaper when the flue qualifies. HeatShield ceramic resurfacing typically runs $1,200 to $2,600, compared with $2,400 to $5,200 for a full liner. A flue with sound masonry and only surface cracking is a good candidate; one with broken or shifted tile usually needs the liner. We’ll tell you which applies to your chimney. Call (833) 946-8575 to find out.
How much does a chimney rebuild cost in New Orleans?
A chimney rebuild in New Orleans typically runs $3,500 to $9,000 for the upper masonry above the roofline, and $8,000 to $14,000 or more for a full rebuild from the roof to the firebox. A crown-only repair is $600 to $1,800. Call (833) 946-8575 for a written estimate on your chimney.
Why is my chimney repair quote higher than I expected?
The most common reason is that the masonry above the roof needs work in addition to the flue itself. A quote that includes crown repair, flashing, and a new cap alongside the liner will be higher than a liner alone, because it’s more work and more material. We itemize every line so you can see exactly what’s driving the number. Call (833) 946-8575 and we’ll walk you through the estimate.
Can a chimney liner and rebuild be done in one visit?
Often in a single scheduled job, yes, when the work is planned together. A liner install paired with crown and cap work is typically one appointment. A full rebuild is a longer project and gets scheduled accordingly. Call (833) 946-8575 to talk through your chimney and get a timeline. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Get a Written Estimate Before You Commit
Chimney work sits in a category where the scope can change once the flue is actually open. A quote that looks low on the phone can grow when the technician finds a shifted tile or a crown that’s been letting water in for years. That’s why we inspect first and put the number in writing. No vagueness, no “we’ll see when we get up there.” If the flue qualifies for resurfacing instead of a liner, you’ll see that path and its cost. If it needs the full rebuild, you’ll see the line items that make up that number.
We handle all three of our service lines – chimney sweeping, chimney repair, and dryer vent cleaning – because the most common residential fire hazards in a home usually show up in more than one place. When we’re on site for a chimney inspection, we can also look at the dryer vent while we’re there. One call, both venting systems checked. That’s part of why we work as New Orleans Chimney Cleaning rather than a sweep-only operation that hands over a checklist and leaves.
Our technicians have up to 14 years of experience, and we work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters for a liner install because the material inside your chimney is what determines how long the repair holds. Big-box liners and discount hardware don’t carry the same wall thickness or the same joint integrity as a professional liner, and in a humid climate like ours, that difference surfaces quickly.
What the Inspection Actually Covers
Before we quote a liner or a rebuild, we look at the flue from top to bottom, check the crown and flashing, look at the mortar joints above the roofline, and assess whether the clay tile is intact. For a home in New Orleans, that check often turns up the same themes: a crown that’s cracked from years of sun and rain, mortar joints that have softened, and a flue interior that may or may not still accept a resurfacer. We give you the finding, the options, and the cost for each option. You decide.
It’s a free estimate. There’s no service-call fee, and the price is set per job by the written quote – not a phone estimate, not a ballpark. If you want the real number, the fastest path is a scheduled inspection. Call (833) 946-8575. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
His
None of this work is DIY territory. A chimney liner install involves working at height, handling a stainless liner that has to run the full length of the flue, and getting the top plate and cap seated correctly so water stays out. A rebuild is heavier masonry work on a roof. Even the resurfacing step requires the flue to be properly cleaned and prepped before the ceramic goes on, and a flue that’s been resurfaced incorrectly can fail just like a cracked one. We keep the safety caveat simple: this is work for a trained chimney professional, not a weekend project. If you’re not sure what condition your flue is in, that’s what the inspection answers.
Contact Us for a Free Chimney Liner & Rebuild Estimate
If you’re in New Orleans and your flue needs attention, the next step is a free estimate. We’ll look at the chimney, tell you whether resurfacing or relining fits, and give you a written price. Call (833) 946-8575. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at New Orleans Chimney Cleaning.
Pricing reflects the New Orleans market as of 2026. New Orleans Chimney Cleaning offers free estimates – call (833) 946-8575.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Cedric Dawson"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Doug Doyle"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Erin Vaughn